Victoria Arduino Eagle One
Product Summary Output
The Eagle One was developed to reduce our environmental impact by embracing new technology. Carbon emissions from power consumption are minimised through the use of new materials and the unique design of the machine. This can save you money on your power costs, especially when compared to other machines.
Coffee Equipment Item
- 2 Groups
- 3 Groups
Sourcing & Service
Espresso Machine Guide
Our free guide to buying an espresso machine brings together firsthand experience, tips from the coffee shops getting it right and insight from across the coffee community.
United Baristas Guides ➜The NEO engine uses an instant heating system with a unique insulation mechanism, that reduces not only the heat dispersion but also energy consumption. It works almost instantly, allowing only the necessary amount of water for the extraction to be heated, thus reducing energy-related costs.
Productivity and performance remain high, but consumption is considerably reduced. The LCA* (Life Cycle Assessment) demonstrated how the Eagle One had a 23% less environmental impact concerning the same category machine.
TERS (Temperature Energy Recovery System) uses the discharged water to pre-heat the incoming water. The result is a 8% saving on total machine consumption.
For the shape of the Eagle One, Victoria Arduino was inspired not only by its impressive history, but also concentrating on the needs of the new era coffee shops that require compact, efficient, and sustainable machines.
That's how design and innovation fuse: having a substantial impact inside the machine in correspondence with its new form. The result is an extremely compact object, simple to use, minimal design, with a new engine able to guarantee high performance and energy efficiency.
United Baristas Equipment Store
Victoria Arduino Eagle One
£7,890.00 – £12,410.00 + VAT, if any
Soaring spirit.
Incorporating an energy-efficient boiler system, Eagle One lowers both your power bills and your coffee’s carbon footprint. Cold water is pre-heated on entry before passing through small well-insulated boilers before being finally heated to dispensing temperature with a flash element in the group head. Eagle One is around one-third more energy-efficient than comparable machines at medium shop volumes. Eagle One is also packed with useful barista functions, including auto purge, volumetric programming, shot timers and two configurable shot buttons on each group head.
The Eagle One has lower running costs and despite its smaller boilers is suitable for all but the busiest of coffee shops (if you have a high volume location, consider the Black Eagle Maverick). United Baristas is also enthusiastic for Easy Steam, to enable barista multi-tasking during milk preparation.
- Product Information & Options
- Customisation
- Shipping & Installation
- Care & Maintenance
- Victoria Arduino Engineers
- Carbon Footprint
- Repair, Reuse, Recycle
- Victoria Arduino Products
<i class="fa-solid fa-box"></i> Product Information & Options
View product information
Explore product features and specifications, view brochure and installation requirements, plus learn about care and maintenance.
Victoria Arduino Eagle One
- 2 Groups
- 3 Groups
Product Options
There are various options available when you order Eagle One from Equipment Store. For specific information refer to the latest product brochure on the product information page. You can contact us before purchase to order options as part of your finance package. Please note that various options impact the lead-time, see shipping & dispatch information.
- The panels can be painted a custom RAL colour during assembly at the factory.
- Eagle One can be fitted with an easy steam wand on left or right or both. The wand is fitted at the factory during assembly. When ordering Easy Steam, please specify the barista’s left or right side in order notes. If you want Easy Steam wands on both sides, please contact us.
- Decorative wood or rock grey back panels are available when assembled at the factory. You can also have your own back panel manufactured, a template is available on the Eagle One catalogue page.
- Eagle One can also be fitted with Smart Water Technology and/or a wifi module for remote monitoring and telemetry.
Customisation
United Baristas can customise this product
Many products also have various options available. Current options are summarised in the Product Information & Options section and in the latest product sheet in Equipment Catalogue.
Common product options are typically available as part of the online ordering process. Other options can be ordered by contacting customer services.
Shipping & Installation
Shipping
United Baristas Equipment Store ships to UK physical addresses. Free shipping is available on products over £200, some exclusions apply and there are surcharges for some bulky and oversize products to remote regions. Any shipping costs are calculated at checkout.
Dispatch
Orders are dispatched as soon as practically possible after payment clearance. However, by arrangement, we can store purchased items in the UK warehouse until you’re ready to receive them. Tracking or delivery information is provided at the time of dispatch.
Shipping, delivery & installation information and options
Lead-times
In stock products
In stock items are typically dispatched within two working days of payment clearance. We endeavour to keep the most popular products in stock.
Product options and customisation
Products that require bespoke assembly, customisation or manufacture have longer lead times. It’s best to order these items well in-advance as it is easier for us to store these items in the UK warehouse than it is to speed up customisation work or manufacturing.
Product options are typically completed within 5 working days. Comprehensive customisation work can take up to 50 working days depending on the complexity of the work and the availability of parts. If your item is being assembled or painted by the manufacturer, the factory lead-times apply.
Product Options & Customisation
Factory Orders
Orders that utilise production options, bespoke manufactured or not available from the UK warehouse are categorised as factory order items. These products are typically dispatched from the UK warehouse within 10 – 25 working days of payment clearance. Lead times vary by manufacturer, an overview is available. We will contact you with an expected dispatch date when you’re item is en route to the UK warehouse.
Bulky & Heavy Delivery
Bulky and heavy items are delivered palletised with a kerbside delivery service. Make sure you have the ability to move bulky and heavy items from the lorry into your premises.
Installation
United Baristas can install select items. Select the installation option at checkout to book this service.
Most products have installation requirements for electrical supply, water and waste. Installers are not able to perform plumbing or electrical work other than connecting the item. You can view the requirements on the product’s information page.
If you opt for installation, we will be in touch to arrange a pre-installation check. Assuming everything is ready, we will then be able to confirm an installation date. In many cases, the installer will bring the item with them to install.
Further information on espresso machine installation
Care & Maintenance
Cleaning
All espresso machines should be cleaned daily to prevent build-up of oils around the group head. This is typically done in-house as part of the shutdown procedure. Cleaning your espresso machine both improves the quality of your coffee and helps prevent wear.
Water Filtration
Water filtration is essential for espresso machines throughout the United Kingdom. Without adequate filtration, limescale enters the boiler(s) and components damaging the machine. None of the espresso machine manufacturers’ warranties cover damage from poor or inadequate water filtration. The right filtration cartridge depends on your local water quality and your volume of water use. In most cases your local engineer is best placed to make a recommendation and can install the system when installing the espresso machine.
When you have an espresso machine installed through Equipment Store we will either make a water filtration recommendation or connect you with the installing engineer in advance so you can identify a suitable option. Water filters typically require replacement two or four times per year. If you need to replace your filter more frequently, consider using a larger cartridge.
Product Information
Specific care and maintenance information is available for this product. To view videos and documentation, follow the product link on the Product Information section.
Maintenance & Service
There are two types of service: front end service (in situ on premises) or a full service (undertaken in the engineer’s workshop).
Many businesses choose to alternate front end and full services, so a machine benefitting from bi-annual servicing would typically have one front end service and one workshop service each year.
Regular planned services are both cheaper over the medium-term and less disruptive to business operations.
Boiler inspections
Espresso machines require annual certification to comply with the Pressure Systems Safety Regulations (PSSR 2000). Checks and certification can now be performed by engineers who have undergone training to become a ‘component person’. Many businesses coincide boiler inspections with a service.
Victoria Arduino Engineers
Popular Victoria Arduino Engineers
King Coffee
The Coffee Lobby UK Ltd
- Engineering
- Equipment Sales
- Parts
Espresso Fix
- Engineering
- Equipment Sales
Backup Coffee and Service
Carbon Footprint
Embodied carbon
United Baristas is establishing a programme to address the embodied carbon in the products we sell. We’ll update this section when the programme is launched. Your purchase of this product will be included in the programme and helps us to start this initiative. Thanks for your support.
Carbon emissions from use
Usage is the greatest cause of a product’s carbon footprint across all stages of its life from manufacture to disposal. There’s a tendency not to consider these emissions if the primary focus is on cutting waste. However, in 2022, approximately 182 grams of CO2e were emitted for every kWh generated in the United Kingdom. Shifts to renewable and nuclear generation, we well as the phasing out of coal and gas generation, will reduce the carbon intensity of electricity over time.
You can lower your electricity consumption and carbon emissions by both purchasing energy-efficient coffee equipment and using energy-efficient practices. More information is available on United Baristas.
Maintaining equipment
You can lower the carbon footprint of this product by keeping it in working condition and prolonging its working life. You can source parts and find engineering services on United Baristas Market. From a carbon reduction perspective, it makes sense to upgrade when a new product’s efficiency is great enough to outweigh the embodied carbon within several years.
End of life
As many components can be recycled and precious metal recovered, dispose of this product responsibly and do not discard in general waste. Further information is available in the product’s manual.
Repair, Reuse, Recycle
Repair & maintenance
Parts for this product are readily available and can be replaced. Minimise wear with regular care and maintain programme. Basic care and maintenance should be carried out in-house, as well as the replacement of some parts. Regular servicing and the replacement of electrical or boiler components can be performed by an engineer.
Reuse
Aim to maximise the working life of all coffee-making equipment. If you should no longer have need for this item, sell it to another barista or coffee company on United Baristas Marketplace.
Recycling
At end of life many of the components can be recycled. Dispose of this product responsibly and do not discard in general waste. Specific information is available in the product’s manual.
Victoria Arduino Products
Other Victoria Arduino products available on United Baristas Equipment Store
-
Victoria Arduino Mythos
Save up to £600 £1,650.00 – £2,750.00 + VAT, if any -
Victoria Arduino MDH
Save up to £55 £395.00 + VAT, if any -
Victoria Arduino Eagle One Prima
Save up to £840 £3,750.00 – £5,410.00 + VAT, if any -
Victoria Arduino Atom (Prima Edition)
Save up to £140 £750.00 + VAT, if any -
Victoria Arduino MDXS
Save up to £105 £675.00 + VAT, if any -
Victoria Arduino MDJ
£1,050.00 + VAT, if any -
Victoria Arduino VA358 White Eagle
£8,100.00 – £10,200.00 + VAT, if any -
Victoria Arduino VA388 Black Eagle
£12,990.00 – £16,860.00 + VAT, if any
Also Available
Documents
-
File DescriptionFile SizeFile TypeDownloads
-
Compare Service Efficiency PDF
338 KB
0 -
Victoria Arduino Eagle One Planned and Preventative Maintenance
540 KB1 -
Victoria Arduino Eagle One spare parts book
Exploded diagram for Victoria Arduino's Eagle One espresso machine3 MB0 -
Victoria Arduino Eagle One Installation Checklist
Prepare to install your Victoria Arduino Eagle One2 MB4 -
Carbon footprint EAGLE ONE
1 MB1 -
Victoria Arduino Eagle One brochure
Learn about Eagle One4 MB8 -
Victoria Arduino Eagle One panels
Dimensions for the customisable Eagle One panel259 KB2
Buying, Maintaince & Service
Sourcing & Service
Discussion & Questions
-
{{#owner}}
-
{{#url}}
{{#avatarSrc}}
{{name}} {{/url}} {{^url}} {{#avatar}} {{& avatar}} {{/avatar}} {{name}} {{/url}} - {{/owner}} {{#created}}
- {{created}} {{/created}}
